Difference between revisions of "Accessing Swestore with rclone"

From SNIC Documentation
Jump to: navigation, search
(Requirements - cert auth)
(Config - rclone cert alias)
Line 102: Line 102:
  
 
In the following sections, we are assuming your swestore remote is named <code>swestore</code>
 
In the following sections, we are assuming your swestore remote is named <code>swestore</code>
 +
 +
== Additional steps for Certificate authentication ==
 +
 +
Unfortunately rclone doesn't (yet) support adding the needed client certificate paths to the configuration, requiring the following invocation for all rclone commands:
 +
rclone --client-cert=/tmp/x509up_u${UID} --client-key=/tmp/x509up_u${UID}
 +
 +
Since this is obviously very cumbersome, we strongly suggest adding an alias for it. In the example below, an alias is added for <code>rclone-cert</code> to do the above invocation. The example assumes that the bash shell is used:
 +
 +
echo 'alias rclone-cert="rclone --client-cert=/tmp/x509up_u${UID} --client-key=/tmp/x509up_u${UID}"' >> ~/.bashrc
 +
 +
The alias will be activated in a new shell or login session.
 +
 +
For all invocations using certificate authentication, use <code>rclone-cert</code> instead of <code>rclone</code> to pass the needed arguments to rclone.
  
 
= Copying files =  
 
= Copying files =  

Revision as of 12:18, 9 March 2022


< Swestore-dCache

This guide describes how to use the Rclone WebDAV client for storing and retrieving files from Swestore. Rclone is versatile and supports many protocols through a simple command line interface (CLI).

Requirements

SNIC resources should already have rclone installed. To install rclone on your own computer, please follow your systems instructions at the official rclone documentation pages here.

To access Swestore using rclone you need to be a member of a Swestore storage project, see Swestore#Getting access to Swestore.

Depending on your preference and security needs, you can use rclone with either certificate or username/password authentication.

Username/Password

This method will require you to enter your username/password in the rclone configuration file. While this is convenient, it is also a security risk since a malicious user gaining access to the rclone configuration file or your login on the affected resource will also gain access to your Swestore dCache storage.

To use this authentication method you need to know your Username and password, see Setting your Swestore password.

Certificate authentication

This method requires you to obtain a security certificate and install it. While more cumbersome to set up, it provides a higher level of security.

To use this authentication method you need to do the Certificate setup described in Accessing Swestore with the ARC client#Requirements

Quickstart

Swestore access URL

The WebDAV access URL for Swestore should be specified for rclone as;

https://webdav.swestore.se

Basic commands

rclone config - configure rclone. See Rclone configuration for details.
rclone ls - for listing files. Works similarly to ls. See Rclone ls.
rclone copyto - for copying directories or separate files. Works similarly to cp with wildcards. See Rclone copyto.
rclone copy - for copying contents of directories. Works similarly to cp -R path/*. See Rclone copy.
rclone mkdir - for creating directories. Works similarly to mkdir -p. See Rclone mkdir.
rclone deletefile - for removing specific files. Works similarly to rm. See Rclone deletefile.
More powerful removal functions are available, but be careful with these;
rclone delete - for removing all files under path - i.e. you loose your data. Works similarly to find path -type f | xargs rm. See Rclone delete.
rclone rmdir - removing path if empty. Works similarly to rm -d. See Rclone rmdir.
rclone rmdirs - removing all empty directories under path. Works similarly to find path -type d | awk '{ print length, $0 }' | sort -nsr | cut -d" " -f2- | xargs rm -d (example modified from stackoverflow). See Rclone rmdirs.
rclone purge - be very careful using this since it will remove all data under path, including path - i.e. you loose your data. Works similarly to rm -rf. See Rclone purge.

Use man and --help to get more info on rclone and its commands. Examples: man rclone, rclone --help or rclone copy --help .

Paths

The rclone commands supports multiple storage protocols. Given that you have configured https://webdav.swestore.se as the swestore remote, we recommend using WebDAV with paths on the form swestore:/snic/YOUR_PROJECT_DIR/... .

Configuration

You have to configure rclone with your access protocol, URL and possibly user login credentials for it to work with Swestore dCache.

Issue the following configuration command to interactively configure rclone:

rclone config

Then choose between the two configuration alternatives below, depending on you authentication preference.

For configuring Swestore dCache access using WebDAV and Certificate authentication:

n for New remote
swestore for name
webdav for Storage (or the corresponding number in the list)
https://webdav.swestore.se for url
other for vendor (or the corresponding number in the list)
Just press <Enter> for user (ie. leave blank)
n for No leave this optional password blank
Just press <Enter> for bearer_token
n for Edit advanced config?
y if you think the resulting config is correct, otherwise e to edit again.
q to Quit config

Alternatively, for configuring Swestore dCache access using WebDAV and Username/Password authentication:

n for New remote
swestore for name
webdav for Storage (or the corresponding number in the list)
https://webdav.swestore.se for url
other for vendor (or the corresponding number in the list)
yourusername for user, should be on the format s_user
y for Yes type in my own password
then enter your swestore password twice
Just press <Enter> for bearer_token
n for Edit advanced config?
y if you think the resulting config is correct, otherwise e to edit again.
q to Quit config

To see your configuration afterwards, run

cat ~/.config/rclone/rclone.conf

You can also list your configured remotes by issuing

rclone listremotes

In the following sections, we are assuming your swestore remote is named swestore

Additional steps for Certificate authentication

Unfortunately rclone doesn't (yet) support adding the needed client certificate paths to the configuration, requiring the following invocation for all rclone commands:

rclone --client-cert=/tmp/x509up_u${UID} --client-key=/tmp/x509up_u${UID}

Since this is obviously very cumbersome, we strongly suggest adding an alias for it. In the example below, an alias is added for rclone-cert to do the above invocation. The example assumes that the bash shell is used:

echo 'alias rclone-cert="rclone --client-cert=/tmp/x509up_u${UID} --client-key=/tmp/x509up_u${UID}"' >> ~/.bashrc

The alias will be activated in a new shell or login session.

For all invocations using certificate authentication, use rclone-cert instead of rclone to pass the needed arguments to rclone.

Copying files

Copying files to and from resources is accomplished using the rclone copy and copyto command.

Copying single files

Copying single files is accomplished in the same way as using the normal cp command as shown in the following example:

rclone copyto archive.tar.gz swestore:/snic/YOUR_PROJECT_DIR/archive.tar.gz

You can also use copyto in order to rename the file in the process of copying it to the destination, by specifying a different filename on the remote.

Recursive copying

Recursive copying of a directory is accomplished using the copy command. The command will only copy files that have changed on the source compared to the destination, which is determined by checksums and timestamps. Observe that the source directory is not copied over, only its contents. Also, empty directories are omitted.

Example:

rclone copy /path/to/src swestore:/snic/YOUR_PROJECT_DIR/DESTINATION_DIRECTORY

The option --no-traverse can be used to not list files on the destination (good for huge directories). --max-age can be used to select the most recently modified files for transfer, and -P gives you status on progress.

Example, copying the last days modifications, with progress:

rclone copy --max-age 24h --no-traverse -P /path/to/src swestore:/snic/YOUR_PROJECT_DIR/DESTINATION_DIRECTORY

NOTE: The above example will copy all files in the directory src into the destination directory DESTINATION_DIRECTORY. If you want the directory src to be part of the destination path you have to explicitly supply it as shown in the example below:

rclone copy /path/to/src swestore:/snic/YOUR_PROJECT_DIR/DESTINATION_DIRECTORY/src

Listing

Rclone supports listing all files under a path.

Listing files and directories on a resources is done using the ls or one of the ls* commands (see below). The simple ls command only lists objects and their sizes in the specified directory and all subdirectories due to recursion being enabled by default.

rclone ls swestore:/snic/YOUR_PROJECT_DIR

Further functionality can be be achieved from using any of the the following ls* commands;

lsl long listing with additional info
lsd list only directories
lsf list objects and directories, in a fashion good for scripting
lsjson gives advanced output in JSON format

NOTE: The ls and lsl recurses to show all subdirectories by default - use --max-depth 1 to disable it. For other commands you need to specify the -R flag to enable recursion.

Examples:

rclone lsl --max-depth 1 swestore:/snic/YOUR_PROJECT_DIR
rclone lsd swestore:/snic/YOUR_PROJECT_DIR

Creating directories

Directories are generally created on demand. If you copy a file with the destination /snic/YOUR_PROJECT_DIR/newdir/dummyfile the newdir directory will be created if missing. But you can explicitly create directories using the mkdir command.

rclone mkdir swestore:/snic/YOUR_PROJECT_DIR/newdir

Removing files or directories

Beware that the command delete will recursively delete all file objects under specified path!

To remove the file dummyfile under /snic/YOUR_PROJECT_DIR/newdir,

rclone deletefile swestore:/snic/YOUR_PROJECT_DIR/newdir/dummyfile

To remove a directory, they have to be empty, and you use the command

rclone rmdir swestore:/snic/YOUR_PROJECT_DIR/newdir/

To remove all empty directories under a path, use

rclone rmdirs swestore:/snic/YOUR_PROJECT_DIR/newdir/

To recursively remove all files under /snic/YOUR_PROJECT_DIR/newdir, leaving the empty directory structure in place, be careful;

rclone delete swestore:/snic/YOUR_PROJECT_DIR/newdir/

Do not use the command purge, as that will delete everything under the path specified.

FAQ

Q: I used rclone purge or rclone delete and have now deleted all my files; can I get them back somehow?

A: No. Swestore does not currently support recovery of data for which the user has explicably requested to be deleted from the system, be it intentionally or by mistake. Therefore caution is advised while using powerful tools such as rclone.